A light brown sand colour, a very delicate sandy shade.
- Medium translucency. The surface underneath is almost always visible, but lighter coloured surfaces can be obscured if a number of coats are applied.
- Medium to good solubility in water. Easier to wipe and smudge.
- A good colour for a light sand shade on landscapes and ballast.
- Colour: Light brown, slightly golden sandy brown colour. Midway between the Mud Brown and the rich Rusty Red.
How to use:
- Ensure there is good ventilation.
- Wear a face mask when spraying and gloves when smudging.
- Ensure all surfaces to be sprayed are clean, dry and free from grease.
- Apply a coat of matt varnish before starting to protect from possible damage.
- Mask areas of the model that are not to be sprayed.
- Spray over suitable protective sheets.
- Shake the can for at least 5 seconds before use and often while spraying.
- Spray to one side first to clear the nozzle.
- Hold the can in an upright position 300mm from a surface.
- Spray evenly moving the can from side to side.
- Keep button fully depressed while spraying. Spots of concentrated dye may appear if the button is only partially depressed.
- Use sparingly. Apply several light coats rather than one heavy coat.
- The colour will vary depending on the number and thickness of coats applied.
- Heavy spraying may result in the dye dripping or puddling.
- Modelmates may not adhere to some very highly polished surfaces.
- Drying time is usually less than a minute for a light coat.
- Caution – solvent can damage some surfaces.
PLEASE NOTE: As this product is a Dangerous Good, shipping may take an additional 1–3 Working Days.
Modelmates was started in 2009, but has been selling weathering and ageing products since the 1980’s under the “Dirty Down” brand. As a family owned business Modelmates is dedicated to innovation and creativity, developing great products not available from any other manufacturers.