EVGA iCX Technology is not JUST a Cooler, It is a combination of new PCB, Thermal Modules, LED and Precision XOC.
Featuring
- a total of 11 global patents (pending and granted), iCX is efficiency perfected.
- 9 Additional Sensors and MCU's embedded on the PCB.
- Purposefully-directed Airflow Chambers.
- Newly Designed Die-Cast Baseplate and Backplate.
- Full Control Using EVGA Precision XOC.
WHY WAS iCX CREATED?
After the ACX 3.0 cooler was verified to operate within spec on Power and
Memory section from independent third party testing, we determined that on an
enthusiast graphics card, one thermal sensor is just not enough. On an
enthusiast graphics card, equal importance should be given to the Power and
Memory, not just focused on GPU. This type of thinking required a drastic change
in the way thermal management is performed on a graphics card.
**A new and more efficient way to cool **
GPU fan determined by GPU temperature (left fan). Power / Memory fan determined
by power / memory temperature (right fan)
Full Control with EVGA Precision XOC
Each sensor can be monitored in real time and displayed on PXOC OSD. Control the
VGA/Power fans simultaniously or asyncronously.
Optimized Airfor Fin Design
Fin holes direct airflow through fins Half open fin maximizes airflow and
L-shaped fins increase surface contact.
SPECIFICATIONS
- Base Clock: 1556 MHZ
- Boost Clock: 1670 MHz
- Memory Clock: 11000 MHz Effective
- CUDA Cores: 3584
- Bus Type: PCI-E 3.0
- Memory Detail: 11264MB GDDR5X
- Memory Bit Width: 352 Bit
- Memory Speed: 0.2ns
- Memory Bandwidth: 484 GB/s
- LED Logo: RGB
DIMENSIONS
- Height: 4.376in – 111.15mm
- Length: 10.5in – 266.7mm
KEY FEATURES
- Simultaneous Multi-Projection
- VR Ready
- NVIDIA Ansel
- NVIDIA SLI w/ HB Bridge Support
- NVIDIA G-SYNC
- NVIDIA GameStream
- NVIDIA GPU Boost 3.0
- Microsoft DirectX 12
- Vulkan API
- OpenGL 4.5 Support
- Max Digital Resolution – 7680×4320
- HDMI 2.0b, DisplayPort 1.4 and Dual-Link DVI
- Built for EVGA Precision XOC
- Asynchronous Fans
- 9 additional temp sensors to monitor Memory and VRM
- GPU / Memory / PWM Thermal Status Indicator LEDs
- New vented heatsink fin design and pin fins for optimized airflow
- Safety fuse to protect components from damage due to improper installation or other component failures
- Redesigned cooling with L-shaped contact fins to improve contact surface area for better heat dissipation
- EVGA iCX Technology
RESOLUTION & REFRESH
- Max Refresh Rate: 240Hz
- Max Digital: 7680×4320
**REQUIREMENTS **
- 600 Watt or greater power supply.
- PCI Express, PCI Express 2.0 or PCI Express 3.0 compliant motherboard with one graphics slot.
- An available 6-pin PCI-E power connector and an available 8 pin PCI-E power connector
- Windows 10 32/64bit, Windows 8 32/64bit, Windows 7 32/64bit