DYNAMIX Defender 650VA (390W) Line Interactive UPS, 936J Surge Protection, 2× NZ Power Sockets, Netguard Smart Monitoring
The Defender range uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage protecting your valuable equipment from power line disturbances. The stylish LCD display, user replaceable battery and two Australia/NZ sockets make the Defender the complete package at this level. The Defender USB communication port is compatible with Synology NAS products. NetGuard™ UPS management software included.
Features
- Surge Protection, Best in its Class
- Australian/NZ outlets for UPS and Surge protection (x2)
- Buck and boost AVR for voltage stabilisation
- User replaceable battery
- Silent Operation (No fans included)
- Auto restart when AC returns
- Off-mode charging
- Cold start function
- USB communication with sophisticated NetGuard® software
SPECIFICATION
Capacity 650V A / 390 W
Topology Line Interactive
INPUT
Voltage 240Vac (Nominal)
Voltage Range 177–290Vac
Frequency Range 50/60Hz±5Hz (Auto sensing)
OUTPUT
Output Voltage 240Vac±10%
Frequency AC mode tracks utility. Battery mode 50Hz±1%
Frequency Range 50Hz or 60Hz±1Hz
Transfer Time 6ms (Typical)
Waveform (Battery Mode) Simulated Sine Wave
Outlets 3× Surge Protection and 3× Surge Protection + UPS
BATTERY
Battery Type & Number 12Vx9AH (x1)
Typical Recharge Time 6 hours recovery to 90% capacity
Backup Time (50% Load) 13min
PROTECTION
Full Protection Overload, discharge, thermal, short circuit and
overcharge protection
Surge Protection 312Joules / 6500Amps
COMMUNICATIONS & MANAGEMENT
Interface USB Interface
Software NetGuard® supports Windows®, Linux, Unix &
MAC
LCD Alarm AC Mode, Battery Mode, Low Battery (Batt. Mode),
Fault, Overload
Audible Alarm Battery Mode, Low Battery (Batt. Mode), Fault,
Overload
PHYSICAL
Dimensions (D x W x H) 328 × 100 × 145mm
Net Weight 5.2kg
OPERATING ENVIRONMENT
Temperature 0 – 40°C
Humidity 0 – 90% (RH Non-condensing)
Noise Level <5dB (no fan)
COMPLIANCE
Safety EN62040–1–1 2003. IEC60950–1 : 2001
EMC EN62040–2 2006
RoHS Directive 2011 / 65 / EU