Here are some other products you might consider...
| 5 star |
|
(15) |
| 4 star |
|
(5) |
| 3 star |
|
(2) |
| 2 star |
|
(0) |
| 1 star |
|
(0) |
Amazing case, brought to upgrade since I cheaped out on the case when I first started building, RGB and tempered glass look great! much bigger then my other mid tower case and fans make for really good airflow which is resulting in better performance. Would recommend, best in its price range! Thanks mightyape
A very clean and simplistic look. Very accessible too with the thumbscrews on both sides, a pop out front and top filter held on my magnets.
Very cheap considering what you're getting. An all round good case, even coming with x3 RGB case fans and RGB strip down near the PSU compartment. Sadly its an off-Chinese brand of RGB lighting so it isn't compatible with much, if anything else.
A lot of space in this case too. The only reasons I put this at 4 star instead of 5 is because of 1– The Chinese RGB lighting that you cannot connect to anything else (aka Corsair Commander) 2– The strange front filter. You cannot have the front filter in if you plan on having a radiator at the front, unless you want to put holes in it. 3– Airflow from the front is not great due to the small strips on the sides of the front panel which is all that lets in air and also gets blocked by dust fairly easily.
Like a high end case but without price tag.
Not a fault for me, so much space for cables you don't even need to jam the side panel off. Innovative design means you can also put it on one handed. Glass is real and good quality. 11/10.
Brought one to sell I loved it so much that my partner brought a second RGB one for my birthday –
MATREXX 70 ADD-RGB 3F is a new-concept chassis specially designed for the enjoyment of DIY. By adopting numerous novel structural designs, its architecture yields convenience and flexibility in PC building. Meanwhile 3 * CF 120 RGB fans and 1* RGB LED strip are included to provide top-notch lighting effects. MATREXX 70 ADD-RGB 3F is ready to give you a boost of the gaming ambience.
Friendly ADD-RGB Ecosystem Included
The ADD-RGB lighting system includes 5 pre-programmed lighting effects (dynamic
color, static, breathing, comet and fashioncollision) and can be easily
controlled by the RGB button on the I/O panel or motherboard. Meanwhile the
special accessory pack enables the syncing between the products from Deepcool
and other brands, thereby creating a friendly ADD-RGB ecosystem.
Removable radiator/fan Holder
The radiator/fan holder simplifies the installation and replacement of the
radiator and fan, it’s especially effort-saving when you need to install the
radiator and the fan on the different sides of the holder.
Removable Glass PSU Shroud
In MATREXX 70 ADD-RGB 3F, DEEPCOOL creatively used tinted glass as the top
cover of PSU shroud, which is pioneering in the industry.
The tinted glass can hide the power cables while reflecting the RGB lighting of
your other parts, especially GPU, hence creating an infinite space visual
effect. Effect Diagram of Light Bars Installed on the Power Shield (RGB Light
Bars are included)
Flexible Ventilation Solutions with Excellent
Performance
With air intake options at front and bottom, exhaust options at the top and
rear, MATREXX 70 ADD-RGB 3F provides highly flexible ventilation solutions.
Meanwhile the 15mm-wide front intake hole guarantees sufficient air supply,
together with the low friction material applied on all meshes, the cooling
efficiency is maximized.
Motherboard support
E-ATX( Up to 330mm )
ATX
Micro-ATX
Mini-ITX
All-round Dust Proof
Dust filters are installed at the front, top and bottom of the case.The
all-round and fine coverage offers remarkable dust-proof capabilities. Meanwhile
the top filter is magnetic whereas the front/bottom filters are inserted, which
makes them very easy to clean.
Abundant Storage Support
A total of 6* 2.5’’ drives or 4*2.5’’ + 2* 3.5’’ drives can be
mounted in MATREXX 70 ADD-RGB 3F. 2 SSD bays are fixed at the back of
motherboard tray for quick installation. 2* 3.5/2.5’’ hard drive bays are
mounted at the bottom of the case which are relocatable and removable.After
removal, 2*120mm fans can be installed at the location.
Simple & Sleek Design
The front and side panels are made of full-sized, tinted tempered glass. They
display your gears with a classy filter while keeping the overall look
clean .
Spacious Interior
The case’s dimensions are 484×233×492mm, offering gigantic room to manage
cables (170mm motherboard tray-to-glass clearance, 30mm motherboard tray-to-back
plate clearance).
Features
Specifications
Motherboards E-ATX/ATX/Micro ATX/Mini-ITX
Case Type Mid Tower
Materials ABS+SPCC+Tempered Glass
Product Dimensions (L×W×H) 475×228×492mm
Net Weight 9.39 Kg
Gross Weight 10.81 kg
5.25" Drive Bays 0
3.5" Drive Bays 2
2.5" Drive Bays 4
I/O Ports 2×USB3.0/1×USB2.0/1×Audio(HD)/1×Mic
Expansion Slots 7 +2
Cooling Fans Support
Cable Management 30mm Clearance
Liquid Cooler Support
Power Supply Type ATX PS2 (maximum length: 200mm)
CPU Cooler Height Limit 170mm
VGA Length Limit 380mm (horizontal)/360mm (vertical)
There are no Marketplace listings available for this product currently.
Already own it? Create a free listing and pay just 9% commission when it sells!
