The VK248 8-Channel Relay Expansion Box provides an additional eight channels
of relay output for a flexible expansion of the ATEN Control System. This allows
users to control additional devices such as screen, projector lifts and blinds
in environments where more devices are required. With the advantage of an
Ethernet-based connection, the expansion box easily connects to the VK2100
Control Box via a LAN connection from a variety of locations across a
network.
Features
- Provides 8 relay channels to expand the ATEN Control System
- Up to eight VK248 expansion boxes can be added to a single Control Box
- Flexible Deployment: Connects to a Control Box via an Ethernet connection
- ID Switch pairs the VK248 with a controller to instantly configure the network settings
- Provides DC power to power an AC relay module or other device
- Supports Power over Ethernet (PoE) or DC power supply
- Firmware upgradable through USB or Web interface
Specifications
Interfaces
- Relay:
- 8 normally open relays (8 × 2-pole terminal block)
- Contact Rating: Max 24 VDC, 2A
- Ethernet:
- 1 x RJ-45 Female, 10/100Base-T
- Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
- DHCP-enabled. The following default IP settings will be used if no IP is
assigned within 30 seconds:
- IP: 192.168.0.60
- Subnet Mask: 255.255.255.0
Switches
- Controller ID: 1 × 16-segment Switch
- Expander ID: 1 × 8-segment Switch
- Reset Button: 1 x Semi-recessed Pushbutton
- USB: 1 x USB Type A (Firmware upgrade only)
Power Consumption: DC5V:2.82W:24BTU; DC48V:3.53W:27BTU
Environmental
- Operating Temperature: 0 – 50°C
- Storage Temperature: –20 – 60°C
- Humidity: 0 – 80% RH, Non-Condensing
Power
- Output: 12 VDC, 300 mA
Physical Properties
- Housing: Metal
- Weight: 0.65 kg ( 1.43 lb )
- Dimensions (L x W x H): 20.00 × 7.58 × 4.20 cm