HyperX HX432C18FB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4–3200 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total capacity is 16GB. Each module has been tested to run at DDR4–3200 at a low latency timing of 18–21–21 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below.
Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.
The JEDEC standard electrical and mechanical specifications are as follows:
XMP TIMING PARAMETERS
- JEDEC/PnP: DDR4–3200 CL18–21–21 @1.2V
- XMP Profile #1: DDR4–3200 CL18–21–21 @1.2V
- XMP Profile #2: DDR4–2933 CL17–19–19 @1.2V
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.340” (34.04mm), w/heatsink
SPECIFICATIONS
- CL(IDD) 18 cycles
- Row Cycle Time (tRCmin) 45.75ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin) 350ns(min.)
- Row Active Time (tRASmin) 24.375ns(min.)
- Maximum Operating Power TBD W*
- UL Rating 94 V – 0
- Operating Temperature 0C to +85C
- Storage Temperature –55C to +100C
*Power will vary depending on the SDRAM used.