StarTech IDE to SATA Drive Adapter

CONNECT YOUR SATA HARD DRIVE OR BLU-RAY/DVD/CD-ROM DRIVE TO AN IDE MOTHERBOARD

The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port – a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.

FEATURES

• Connect a SATA device to an IDE/ATA motherboard or controller card
• Complete hardware solution; no software required
• Support for 48-bit Logical Block Addressing (LBA)
• Compliant with SATA revision 1.0 specification
• Supports SATA 1/11/111 (1.5/3/6Gbps) drives
• Compatible with ultra ATA 133 specification
• Supports 2.5’, 3.5”, and 5.25” SATA Drives
• ODD (optical Disk Drive) support, including Blu-ray, DVD,and CD-ROM drives
• An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface
• Ideal for use with older motherboards that do not support SATA
• Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
• Hassle-free installation, with no software CD required
• Backed by a StarTech.com 2 year warranty and free lifetime technical support

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5”/3.5”/5.25” SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.

The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.

SPECIFICATIONS

• Warranty Information:
  • Warranty: 2 Years
• Hardware:
  • Chipset ID: Marvell – 88SA8052
  • Compatible Drive Types: SATA
  • Drive Size: 2.5in & 3.5in
  • Interface: IDE
  • Number of Drives: 1
• Performance:
  • Maximum Data Transfer Rate: 133MB/sec
  • RAID: No
• Connector(s):
  • Connector Type(s):
    • 1 – IDE (40 Pin, EIDE/PATA)
    • 1 – SATA Data & Power Combo (7+15 pin)
    • 1 – SP4 (4 pin, Small Drive Power)
• Software:
  • OS Compatibility: OS independent; No software or drivers required
• Special Notes / Requirements:
  • System and Cable Requirements: An IDE controller and ATA cable (not included).
• Environmental:
  • Humidity: 15~90% RH
  • Operating Temperature: 5°C to 50°C (40°F to 122°F)
  • Storage Temperature: –25°C to 80°C (-13°F to 176°F)
• Physical Characteristics:
  • Material: Steel and Plastic
  • Product Height: 0.9 in \[2.3 cm\]
  • Product Length: 3 in \[75.5 mm\]
  • Product Width: 0.8 in \[20 mm\]
  • Weight of Product: 1 oz \[29 g\]
• Packaging Information:
  • Package Height: 1.3 in \[33 mm\]
  • Package Length: 5.7 in \[14.5 cm\]
  • Package Width: 6.9 in \[17.5 cm\]
  • Shipping (Package) Weight: 3.1 oz \[89 g\]
• What’s in the Box:
  • Included in Package:
    • 1 – IDE to SATA adapter
    • 1 – LP4 Molex to SP4 Power Cable
    • 1 – Instruction Manual