Creative Sound Blaster GS3 Compact RGB Gaming Soundbar with SuperWide Technology

A step-up from your built-in desktop or laptop speakers, the compact Sound Blaster GS3 offers an immersive soundstage with pronounced bass that bellies its size. Your audio experience will also come alive with SuperWide™ technology-engineered for the ultimate movie and gaming experience.

• USB AUDIO
• BLUETOOTH 5.4
• 24W PEAK POWER
• AUX-IN
• HEADPHONE-OUT

• Design – LIGHT UP YOUR SOUND: The soundbar offers multiple advanced lighting presets, Chasers, Aurora, Peak Meter, Glowing, Wave and Cycle, perfect for setting the right mood.
• Audio – Immersive Audio: Decked out with powerful full-range racetrack drivers and built-in port tube at the rear of the soundbar, Sound Blaster GS3 deliver consistent audio and great bass! With a peak power of 24W and armed with SuperWide™ technology, the Sound Blaster GS3 stretches audio beyond the limits of conventional acoustic design laws, as it requires a huge amount of acoustic power that’s not possible for a speaker of this size.
• Connectivity – Flexible Connectivity: There are several ways you can connect the Sound Blaster GS3 to your PC\*, gaming consoles, and mobile devices too. These options range from USB-C, AUX-in cable, to wireless Bluetooth 5.4! You can also enjoy high-quality sound without disturbing others when you connect with headphones directly to the soundbar via the headphone-out port.
  • Ensure that the soundbar is connected to the USB-C port directly to achieve optimum volume level. For older laptop versions, try powering the speakers with a wall adapter and connect via AUX-in cable instead.

Technical Specifications

• Speaker Configuration: One-piece, Soundbar
• Connector Type: USB Power, PD Adapter, USB Audio, 3.5 mm AUX-in, Headphones / Headset Port, Headphones-out
• Operating Temperature: 0—45°C
• Recommended Usage: Gaming
• Dimensions: 410 × 92.7 × 73­.7 mm / 16.1 × 3.6 × 2­.9 inches
• Weight: Soundbar: 1.037kg / 2.2 lbs
• Cable Length (End-to-end): USB-C to USB-C Cable: 1.5m / 4.92 ft
• Frequency Response: 65–20,000 Hz
• Signal-to-Noise Ratio (SNR): 85 dB
• Power Output: Soundbar: 2 × 6W RMS, Total System Power: Up to 12W RMS, Peak Power: 24W
• Bluetooth® Version: 5.4
• Profiles: (A2DP) Wireless Stereo Bluetooth
  • \*Stereo Bluetooth or A2DP profile enables wireless transmission of full stereo sound to other Bluetooth devices. To determine whether your device (notebook, PC, or mobile device) is equipped with A2DP-enabled Bluetooth technology, refer to your device manufacturer’s do­cumentation / website for more information.
• Operating Frequency: 2402–2480 MHz
• Operating Range: Up to 10m / 33 ft\*, \*Measured in open space. Walls and structures may affect range of device.
• Wireless Codecs: SBC
• Color: Black
• RGB: Up to 16.8 million colors
• System Requirements:
  • USB Audio:
    • Windows:
      • Intel® i3 or AMD® equivalent processor
      • Intel, AMD or 100% compatible motherboard
      • Microsoft® Windows 11, Windows 10 32/64 bit ver 1903 or higher
      • > 4GB RAM, > 4GB of free hard disk space
      • Available USB-C port (USB 2.0)
      • PC must meet the minimum hardware requirements to operate on the Windows OS installed
    • Macintosh:
      • Macintosh running MacOS 10.15 or higher
      • > 4GB RAM, > 4GB of free hard disk space
      • Available USB-C port (USB 2.0)
    • PS4/PS5:
      • Firmware Ver 5.0 or later for PS4
      • Firmware Version 20.02–2.26.00.00–00.00.00.0.1 or later for PS5
      • Available USB-C port (USB 2.0)
        • PS4 requires USB A to USB C adaptor (Not included)
  • Bluetooth Audio: Compatible Bluetooth devices that support the Advanced Audio Distribution Profile (A2DP)
• Package Contents:
  • 1 x Sound Blaster GS3
  • 1 x USB-C to USB-C Cable
  • 1 x Quick Start Leaflet
• Warranty: 1-year Limited Hardware Warranty