Creality Filament Dry Box 2.0

• Worry-free on Poor 3D Printing by Wet Filament

Wet 3d printing filament will cause stringing, clogging, poor adhesion and Layer Shift. This Creality Filament Dryer Box 2.0 on drying while printing improves your 3D model quality, reducing the impact of the objective environment on the printing of 3d filaments.

• Adjustable Temperature Range

The heating temperature range is 45℃~65℃. Suitable for more than 20 kinds of 3d printing filament such as PLA, ABS, ASA, PETG, TPU, PP, PC, PA, etc. Users can adjust the temperature of the drying box according to different 3d filament types, ambient temperatures, humidity and other factors.

• Personalized Drying Time Setting and Real-time Monitoring

The time setting range is 0~24 hours. you can manually set the drying time as you like. Commonly used 3D filament on the market under normal circumstances only needs 3–6 hours of drying will achieve a good printing experience and printing effect. Besides, Real-time humidity monitoring and drying hours are displayed via a countdown timer, allowing you to track drying conditions.

• Compatible with Multiple Diameter Filaments

the capacity of this Crealtiy dry box 2.0 is 237×266×99mm. Compatible with all the mainstream 3D filament brands Creality, SUNLU, Comgrow, ESUN, AMAZON BASIC, etc.; Works perfectly with all standard filament diameters 1.75mm/2.85mm/3­.00mm.

• Importance of Filament Dryer

Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.

Highlights

• The drying box heats up quickly and has a built-in fan that circulates the hot air through 360° inside the chamber, evenly heating the entire chamber.
• The heating temperature range is 45℃-65℃, suitable for multiple filaments such as PLA, ABS, ASA, PETG, TPU, PP, PC, PA, etc.
• Real-time humidity monitoring and drying hours are displayed via a countdown timer, allowing you to track drying conditions.
• After drying, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality.