Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality (High-Speed Precision)
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute ‘Benchy’ with quality and following all the speed ‘Benchy’ rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy App
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

Features:

• Plug-N-Play
• Active Flow Rate Compensation
• Full Auto Calibration
• Active Motor Noise Cancelling
• High Speed Precision

Specifications:

• Build Volume (WxDxH): 180×180×180 mm³
• Hot-End: All-Metal
• Max Hot-End Temperature: 300 °C
• Nozzle Diameter: 0.4 mm (Included), 0.2 mm, 0.6 mm, 0.8 mm
• Build Plate: Bambu Textured PEI Plate (Included), Bambu Smooth PEI Plate
• Max Build Plate Temperature: 80°C
• Max Speed of Tool Head: 500mm/s
• Max Acceleration of Tool Head: 10000mm/s²
• Monitoring Camera: Low Framerate Camera (Up to 1080P), Timelapse Supported
• Filament Run Out Sensor: Yes
• Filament Odometry: Yes
• Power Loss Recover: Yes
• Filament Tangle Sensor: Yes
• A1 Mini: 347×315×365 mm³ , Package size : 385×430×460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg

Supported Filament:

• Ideal: PLA, PETG, TPU, PVA
• Not Recommended: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer