You May Also Like
Sponsored
240W 2000 SERIES POWER AMPLIFIER – TOA
Offering high-end performance at affordable cost. Think of TOA when you need amplifiers for commercial audio applications.
TOA’s P2240 Power Amplifier is designed to complement the A2000 Series of Mixer Power Amplifiersand is consequently a highly cost effective solution to the demands of PA applications. Features such as front bass, treble and volume controls and a 100 volt line input enures its versatility and adaptability to situations where a booster amplifiers is needed. The 100 volt line input allows it to be aded to the end of an existing 100 volt speaker line or used on the high impedance speaker output of a mixer amplifier.
P2240 Power Amplifier Features:
The P-2240 offers a high performance-to-cost ratio, andcan be used with TOA’s A-2000 Series mixer power amplifiers. Because the P-2240 features
a 100V line input, it can be connected to the speaker line from another amplifier. Also, the P-2240’s power can be switched on and off by remote control, allowing it to be operated independently of the A-2000 Series.
High cost-performance
Flexibility
Easy to handle
| Model No. | A-2030 | A-2060 | A-2120 | A-2240 | P-2240 |
| Power Source | 220 – 240V AC or 24V DC | ||||
| Rated Output | 30W | 60W | 120W | 240W | 240W |
| Power Consumption | 34W (EN60065), 78W (AC operation atrated output), 2A (DC operation at rated output) | 72W (EN60065), 150W (AC operation at rated output), 4A (DC operation at rated output) | 124W (EN60065), 260W (AC operation at rated output), 8A (DC operation at rated output) | 238W (EN60065), 520W (AC operation at rated output), 15A (DC operation at rated output) | 238W (EN60065), 520W (AC operation at rated output), 15A (DC operation at rated output) |
| Frequency Response | 50 – 20,000Hz (3dB) | ||||
| Distortion | Under 1% at 1kHz, 1/3 rated power | Input MIC | MIC 1 – 3: 60dB*, 600Ohm, electronically balanced, XLR3-31 type AUX 1, 2: -20dB*, 10kOhm, unbalanced, RCA pin jack Mute: Contact screw terminal (for MIC 1)Line in: 0dB*, 10kOhm, balanced, screw terminal 100V line in: 40dB*, 330kOhm, unbalanced, screw terminal Power remote control: Make contact | Output – Loop out | 0dB*, 10kOhm, balanced, screw terminal |
| Output – Speaker out | Balanced (floating) | Balanced (floating) | Balanced (floating) | Balanced (floating) | Balanced (floating) |
| Output – High impedance | 330Ohm (100V), 170Ohm (70V) | 170Ohm (100V), 83Ohm (70V) | 83Ohm (100V), 42Ohm (70V) | 42Ohm (100V), 21Ohm (70V) | 42Ohm (100V), 21Ohm (70V) |
| Output – Low impedance | 4Ohm (11V) | 4Ohm (15.5V) | 4Ohm (22V) | 4Ohm (31V) | 4Ohm (31V) |
| Output – Rec. out | 0dB*, 600Ohm, unbalanced, RCA pin jack | 0dB*, 600Ohm, unbalanced, RCA pin jack | 0dB*, 600Ohm, unbalanced, RCA pin jack | 0dB*, 600Ohm, unbalanced, RCA pin jack | Phantom Power | DC +21V (MIC 1) |
| S/N Ratio | Over 60dB | ||||
| Ventilation | Fan cooling | ||||
| Tone Control | Bass: 10dB at 100Hz/Treble: 10dB at 10kHz | ||||
| Muting | MIC 1: Mutes other input signals by 0 – 30dB attenuation | - | |||
| Indicator | Power. signal, peak | ||||
| Finish | Panel: ABS resin, black/Case: Steel plate, black | ||||
| Dimensions | 420 (W) x 100.9 (H) x 280.3 (D)mm | 420 (W) x 100.9 (H) x 360.3 (D)mm | 420 (W) x 100.9 (H) x 351.3 (D)mm | ||
| Weight | 5kg | 7kg | 10.8kg | 13.2kg | 13.2kg |
This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.
All products sold by third-parties are subject to guarantees that cannot be excluded under the Consumer Guarantees Act.
Save with Primate
Earn $14.89 Points Credit*
Exclusive Deals
Mighty Ape Travel discount
^FREE 14 day trial. Primate will be charged $89 / 365 days after free trial, cancel anytime. Delivery benefits available in selected postcodes only. †*T&Cs apply, click for details.
Leaves warehouse in 3-7 business days
