Barix BAR20239437 M400 Multicoder-Low-latency Audio over IP EncoderAAC+ and OPUS with latest Security

The Barix Multicoder M400 boasts up to four internal encoding engines, capable of simultaneous operation, each supporting various audio formats.With support for streaming protocols RTP and BRTP, it can achieve exceptionally low latency. This device can encode incoming audio from connected analog sources into formats like OPUS, AAC+. The Multicoder M400 is purpose-built for low-latency applications and leverages a new Linux-based platform to provide robust security features, including HTTPS for the setup of the device.

Specifications

Power Supply Input	External power adaptor: 100-240V AC, 10W Male barrel connector: 5.5mm x 2.1mm
Ethernet Interfaces	RJ45, 10/100 auto detect, IPv4, IPv6
Audio Input	Stereo RCA / cinch connectors (also mono configurable) 2kOhm input impedance 3.9V p-p max, adjustable in sensitivity Dynamic range 87dB, SNR -87dB control and metadata input support
Audio Formats	OPUS, AAC+ (AAC-HC and AAC-LC) MP3 PCM G.711 Sample rates: 8/16/22.05/24/32/44.1/48Khz Supported bit rates: 32kb/s to 320 kb/s
Network Protocols	Set-up: HTTP/HTTPS Streaming: RTP, BRTP (requested RTP)
Headphone Output	Female Jack 3.5mm
USB	2 extension ports for USB devices (for future use)
RS-232	DB-9, currently not in use
HW/SW Environment	Barix IPAM400 Processor Module Linux with dual boot recovery and remote firmware update capability
User Interface	Network interface for control, status and setup HW reset button, LED for status
Case & Weight	Aluminum 108mm x 38mm x 78.7mm (4.25’ x 1.5’ x 3.1’) Weight 250g
MTBF	>199.951h / 22 years

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.

All products sold by third-parties are subject to guarantees that cannot be excluded under the Consumer Guarantees Act.

Barix BAR20239437 M400 Multicoder-Low-latency Audio over IP EncoderAAC+ and OPUS with latest Security

Specifications

Power Supply Input	External power adaptor: 100-240V AC, 10W Male barrel connector: 5.5mm x 2.1mm
Ethernet Interfaces	RJ45, 10/100 auto detect, IPv4, IPv6
Audio Input	Stereo RCA / cinch connectors (also mono configurable) 2kOhm input impedance 3.9V p-p max, adjustable in sensitivity Dynamic range 87dB, SNR -87dB control and metadata input support
Audio Formats	OPUS, AAC+ (AAC-HC and AAC-LC) MP3 PCM G.711 Sample rates: 8/16/22.05/24/32/44.1/48Khz Supported bit rates: 32kb/s to 320 kb/s
Network Protocols	Set-up: HTTP/HTTPS Streaming: RTP, BRTP (requested RTP)
Headphone Output	Female Jack 3.5mm
USB	2 extension ports for USB devices (for future use)
RS-232	DB-9, currently not in use
HW/SW Environment	Barix IPAM400 Processor Module Linux with dual boot recovery and remote firmware update capability
User Interface	Network interface for control, status and setup HW reset button, LED for status
Case & Weight	Aluminum 108mm x 38mm x 78.7mm (4.25’ x 1.5’ x 3.1’) Weight 250g
MTBF	>199.951h / 22 years

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.

All products sold by third-parties are subject to guarantees that cannot be excluded under the Consumer Guarantees Act.

BARIX M400 Multicoder

Product Details

Specifications

Warranty & Returns

You May Also Like

Get our freshest deals, direct to you every day.

BARIX M400 Multicoder

Deliver to

Product Details

Specifications

Warranty & Returns

Deliver to