Bambu Lab PLA Matte - 1.75mm 1kg/Roll without Reusable Spool - Lemon Yellow

Product Features

• Easy to Print & Beginner Friendly
• Matte Surface Texture
• Biodegradable
• Diameter: 1.75mm +/- 0.03mm

Cautions for Use
AMS & AMS lite Compatible

Bambu PLA Matte
Achieve high-quality prints with a smooth, fine-grained finish using Bambu PLA Matte. Ideal for professionals and hobbyists alike, it adds an elegant touch to your 3D project.

Elegant Matte Finish
Bambu PLA Matte significantly reduces visible layer lines, offering a smooth, non-glossy appearance that makes your prints stand out. Its sleek, refined look is perfect for design projects, architectural models, and display pieces.

A Palette of Soft, Subtle Colors
Select from a curated range of elegant, muted colors that beautifully complement the matte finish, ideal for art, fashion designs, and décor projects.

Easy to Print, High Quality
Bambu PLA Matte delivers premium results at speeds of up to 270 mm/s\* without the need for extensive adjustments.
0.4mm nozzle, 0.4mm line width, 0.2mm layer height

RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Technical Specifications

Recommended Printing Settings

• Drying Settings (Blast Drying Oven): 55°C, 8h
• Printing and Keeping Container’s Hu­midity: < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature: 190 – 230 °C
• Bed Temperature (with Glue): 35 – 45 °C
• Printing Speed: < 300 mm/s

Physical Properties

• Density: 1.31 g/cm³
• Vicat Softening Temperature: 63°C
• Heat Deflection Temperature: 58°C
• Melting Temperature: 163°C
• Melt Index: 39.4 ± 3.2 g/10 min

Mechanical Properties

• Tensile Strength: 30 ± 5 MPa
• Breaking Elongation Rate: 14.8 ± 4.2 %
• Bending Modulus: 2360 ± 250 MPa
• Bending Strength: 53 ± 6 MPa
• Impact Strength: 19.2 ± 3.7 kJ/m²