Fujinon Techno-Stabi TS 16x28 WP (IPX7) Image-Stabilized Binoculars

Enjoy the high power of 16x magnification without having to use a tripod with the Fujinon 16×28 Techno-Stabi Waterproof Image-Stabilized Binoculars. With a vibration suppression range of ±3°, you’ll see the details of far-off subjects without the distracting hand shake that typically spoils the view of traditional high-power optics. You’ll find them especially useful when glassing from a moving vehicle or while running a boat across choppy seas. This version of the 16×28 Techno-Stabi is waterproof as deep as 33’ for up to 30 minutes. Multi-coated optics deliver a bright and crisp image with accurate color and vivid contrast, and the 16mm eye relief and twist-up eyecups make the Techno-Stabi binoculars comfortable to use while wearing glasses. Compact and lightweight with a stabilization correction of +3 degrees Waterproof to a depth of 33’ for up to 30 minutes Ideal in a variety of settings, including concerts, theme parks, and bird-watching Stabilization activates with a shift switch, providing effortless control during prolonged use Provides sharp image at a high magnification without the use of a tripod } } Fujinon Techno-Stabi TS 16×28 WP (IPX7) Image-Stabilised Binocular Model Fujinon Techno-Stabi TS 16×28 WP Part Number 600022987 Country of Origin Made in Japan Use Cases Boating, Wildlife, Tactical Surveillance, Events Color / Finish Matte black, rubber-armored (non-reflective) Warranty 1-Year Limited (Fujifilm Global) Optical System Magnification 16x (fixed) Objective Lens Diameter 28 mm Field of View (Real) 4° Field of View @ 1000 m 70 m Apparent Field of View 58.4° (ISO 14132-1) Exit Pupil 1.8 mm Relative Brightness 3.1 Twilight Factor 21.16 Minimum Focus Distance 3.5 m Light Transmission >95% per surface (via Fujinon EBC Coating) Prisms & Coatings Prism Type Reverse Porro Prism Glass BAK-4 Phase Coated Yes Lens Coatings Fully Multi-Coated (EBC) Image Stabilisation Stabilisation Mechanism ±3° optical axis correction via gimbal-mounted prisms Gyro Sensor Type Dual-axis gyroscopic sensor Stabilisation Latency Under 50 ms (estimated) Activation Push-button toggle with 10-minute auto shut-off Stabiliser Technology Name Gyro sensor prism tilt system Vibration Correction Frequency Not published Focusing & Ergonomics Focusing System Center focus wheel Focus Throw Approx. 1.5 turns (min to ∞) Right Diopter Adjustment ±2 D Interpupillary Distance 56 – 70 mm Eye Relief 16 mm (eyeglass friendly) Eyecups Twist-up, multi-stop Chassis Material Fiberglass-reinforced polycarbonate Grip Coating Full-body rubber armor Tripod Mount Not supported Center of Gravity Compact and balanced for hand-held use Environmental Resistance Waterproof Rating IPX7 (1 m for 30 min) Fogproof Nitrogen-purged and O-ring sealed Shock Resistance Moderate – not drop-rated but robust chassis Operating Temperature -10°C to +50°C Battery Compartment Seal Threaded cap with rubber O-ring Power Battery Type 1 × CR2 lithium (3V) Voltage 3V nominal Battery Model Compatibility CR2 only; rechargeable CR2 not recommended Runtime Approx. 12 hours (continuous at 20°C) Low Battery Indicator No visual indicator; stabilisation gradually degrades Dimensions & Weight Dimensions (L × W × H) 151 × 120 × 74 mm Weight (without battery) 550 g Weight (with battery) 561 g approx. Included Accessories Carry Case Soft padded case Neck Strap Yes (standard padded) Eyepiece Cover Single-piece push-on (not tethered) Lens Cloth Yes Battery 1 × CR2 included User Documentation User manual, warranty card Certifications UPC Code 074101035402