Brand New
Replace adhesive that holds your battery in place
Includes pull tabs to assist with future removal
Compatible with iPhone 12 Pro Max models; A2342, A2410, A2411 & A2412

Product Details

If you have removed or replaced your battery, you will need a new adhesive strip so that you can stick the battery down to the rear case.

The adhesive is pre – cut and is the same size as the original for a perfect fit

Part Features:

Individual tab backing so you can line up and stick down the tabs first
Large peel backing to keep the adhesive aligned and seperated while installing
Pull tabs to assist with removing the adhesive for future battery changes
Just as thin as the original so no issues with pressure marks on underside of screen

Please Note

This is a one – use product. If you remove this adhesive, you will need to replace it

Specifications

Type: Precut adhesive

How do I find my Model number?

Compatible Model Numbers

iPhone 12 Pro Max

Model Number (A Number)

A2342
A2410
A2411
A2412

iPhone 12 Pro Max Model Numbers How do I find my Model number?

Model Identifier

iPhone13,4

EMC Number

EMC 3548
EMC 3549
EMC 3550

Device Number (M Number)

MG8×3
MG8Y3
MG903
MG913
MG923
MG933
MG943
MG953
MG963
MG973
MG983
MG993
MG9A3
MG9C3
MG9D3
MG9E3
MG9F3
MG9G3
MG9H3
MG9J3
MG9K3
MG9L3
MG9M3
MG9N3
MG9P3
MG9Q3
MG9R3
MG9T3
MG9U3
MG9V3
MG9W3
MG9×3
MG9Y3
MGA23
MGA33
MGA43
MGA73
MGA93
MGAA3
MGAF3
MGAH3
MGAJ3
MGAM3
MGAQ3
MGAR3
MGAU3
MGAW3
MGAX3
MGC03
MGC13
MGC23
MGC33
MGC43
MGC53
MGC63
MGC73
MGC93
MGCA3
MGCC3
MGCE3
MGCF3
MGCG3
MGCH3
MGCJ3
MGCK3
MGCL3
MGCM3
MGCN3
MGCP3
MGCQ3
MGCR3
MGCT3
MGD73
MGD83
MGD93
MGDA3
MGDC3
MGDD3
MGDE3
MGDF3
MGDG3
MGDH3
MGDK3
MGDL3

* Please note, to make searching the device number (M Number) easier, we have only listed the part numbers (First 5 characters), we have removed the region numbers as there is no difference in parts. For example, if “M Number” is “MC922LL/A”. we remove the “region” portion and everything after (the “LL/A” at the end) leaving us with “MC922”.

More info Less info

Installation Help

Watch the video above or checkout the step – by – step guide below as they contain information about adhesive removal and installation

iFixit iPhone Battery Adhesive Strip Replacement Guide

Here is some tools you may need to help you complete the repair.

Phillips #000 Screwdriver
P2 Pentalobe Screwdriver
Y000 Triwing tri – point Screwdriver
iSclack opening tool
Suction Cup
Fine Tipped Curved Tweezers
iGadget 5 piece opening picks
Black Spudger
uFix iOpener Heat bag
iHold Evo Screen Holder

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
Before removing your battery, discharge the battery to below 25%. A charged lithium – ion battery can catch fire or explode if punctured or damaged
Removing the old battery adhesive can be frustrating, we recommend grabbing the tabs with tweezers and rolling the adhesive up the tweezers until it is gone. It may also be helpful to remove modular components that might be in the way at the bottom for better access. Also check out this video for more adhesive removal tips.

Caution

If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions

What’s In The Box

1x iPhone 12 Pro Max Replacement Battery Adhesive

Brand New
Replace adhesive that holds your battery in place
Includes pull tabs to assist with future removal
Compatible with iPhone 12 Pro Max models; A2342, A2410, A2411 & A2412