You May Also Like

Sponsored

TVs & Home Entertainment

McLELLAND PLA2FX 120Watt DSP ClassD Subwoofer Power Amplifier

Sold by Bourne Electronics

This item is located outside New Zealand

Product Details

The PLA2FX power amplifier is designed to provide powerful output to speakers used in stereo sound system, 2.1 home theaters, gaming media system and some other listening applications. With Class - D output circuitry, the switching mode power supply offers high efficiency and excellent performance. PLA2FX can be used as two channels, 2.1 channels or bridge as one channel amplifier.
With the LPF switch, it could also be used as a subwoofer amplifier. Built - in DSP (Digital Signal processing) microprocessor to adjust the audio input signal digitally for any kind of speaker and music. Therefore, with its compact size and extremely flexible, the PLA2FX can be used in many different applications.

Features

Output power: 120W x 2 (@4 / 8 Ohm) 240W(Bridged)
Class D circuit design in a compact size
Built - in DSP with Ethernet interface
RCA analog audio inputs
Audio RCA PRE - OUT connector to additional amplifier
Low Pass Filter (LPF) switch sets the amplifier as a subwoofer amplifier.
Speaker output binding post connectors
Selection for Power - Up mode (ON/AUTO/TRIGGER)
TRIGGER IN/OUT could be an external remote ON/OFF
Natural cooling without Fan
Activated standby mode active after 15 minutes of no signal detected
Red LED (Front Panel) to indicate Standby mode is active
Protection: Short circuit, Overheating, Overvoltage, Overcurrent

Specifications

Stereo Output : 120W x 2, 8Ω 120W x 2, 4Ω
Bridged Output : 240W, 8Ω
Frequency Response : 20 Hz ~ 20 kHz, +/ - 2 dB @ 4Ω Load
Low Pass Filter: 150 Hz
Signal to Noise : >90dB A WTD
THD: < 0.05%
Input Sensitivity : 500m V ( - 4 dBu)
Gain Value : 36 dB @ 8Ω
Input Impedance : >10k, unbalanced
Maximum Input Level : 2.5V (+10 dBu)
Trigger In/Out: DC 12V
Input Connectors: RCA jacks
Trigger Connectors: 3.5 mm Jacks
Output Connectors: Binding Posts, RCA (PRE - OUT)
Power Requirements : 100 - 240 VAC, 50 - 60 Hz, 350W
Standby Power Consumption : <3.0W
Dimensions : 214mm(W) x 249.8mm(D) x 44mm(H)
Net Weight: 1.9 Kg

Specifications

Warranty & Returns

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.

All products sold by third-parties are subject to guarantees that cannot be excluded under the Consumer Guarantees Act.

BRN-PLA2FX

9328202034083