TP-LINK CPE520 5GHz 300Mbps 16dBi Outdoor CPE
TP-LINK's 5GHz 300Mbps 16dBi Outdoor CPE, the CPE520 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE520 an ideal choice for both business and home users.
Features
- Built-in 16dBi 2×2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 20km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Specifications
Hardware
- Processor: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
- Memory: 64MB DDR2 RAM, 8MB Flash
Interface:
- 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
- 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
- 1 Grounding Terminal
- 1 Reset Button
- Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; –7,8pins)
- Voltage range: 16–27VDC
- Dimensions (W X D X H): 11×3.1×2.4 inch (276×79×60mm)
- Power Consumption: 14 Watts Max
- Note: When deployed using Passive PoE, the power drawn from the power source
will be higher by some amount depending on the length of the connecting cable.
- Antenna Type: Built-in 16dBi 2×2 Dual-polarized Directional Antenna
- Beam Width: 45° (H-Plane) / 30° (E-Plane)
- Note: For more details, please refer to datasheet
- Protection:15KV ESD Protection, 6KV Lightning Protection
Enclosure:
- Outdoor ASA stabilized plastic material
- IPX5 waterproof Certification
Wireless
- **Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
- **Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds:
- Up to 300Mbps (40MHz,Dynamic)
- Up to 144.4Mbps (20MHz,Dynamic)
- Up to 72.2Mbps (10MHz,Dynamic)
- Up to 36.1Mbps (5MHz,Dynamic)
- Frequency: 5.15~5.85GHz
- Note: Available operating frequency may vary depending on the
limitations of the countries or regions in which the device is used.
- Transmission Power: 27dBm/500mw (Adjustable power by 1dBm)
- Note: Maximum transmission power may vary across different channels depending
on the limitations of the countries or regions in which the device is used.
Software
Wireless Configurations:
Pharos MAXtream TDMA Technology
802.11a/n Modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS Enable/Disable
- **Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging (AP mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
Wireless Advanced:
- Beacon Interval/RTS Threshold/Fragmentation
- Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management:
- Discovery and Remote Management via Pharos Control application
- HTTP/HTTPS Web-based management
- System Log
- SNMP Agent(v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
System Tools:
- Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
System-level Optimizations:
- Optimized IGMP Snooping/Proxy for multicast applications
- Hardware watch dog
PoE Adaptor
Interfaces:
- 1 AC Jack with Earth Ground
- 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)
- 1 10/100/1000Mbps Shielded Ethernet Port (Data)
- **Efficiency: >80%
- **Button: Remote Reset Button
- **Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
- Power Status LEDs: 0~0.8A: Green, 0.8A~1.0A: Red
Output:
- 24VDC, 1.0A Max
- +4, 5pins; –7, 8pins. (Support up to 60m Power over Ethernet)
- Input Voltage; 100VA~240VAC @ 50Hz~60Hz
- Dimensions(W x D x H): 110×57×33.5mm
- Input Current: 0.8A Max @ 100VAC
- Input: 100–240VAC, 50/60Hz
- Output Voltage: 24VDC(+4,5pins; –7,8pins)
Other
Certification: CE, FCC, RoHS, IPX5
Package Contents:
- Outdoor Wireless CPE
- 24V 1A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide
System Requirements:
- Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8,
Windows 7, MAC OS, NetWare, UNIX or Linux.
- Note: We recommend you to use one of following Web browsers for an improved user
experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environment:
- Operating Temperature:** –30°C~70°C (-22?~158?)
- Storage Temperature:** –40°C~70°C (-40?~158?)
- Operating Humidity:** 10%~90% non-condensing
- Storage Humidity:** 5%~95% non-condensing