Kyosho 1:18 Radio Control Drone Racer G-Zero Ready Set (White)
Unlike existing drones that are difficult to control, the sensational DRONE RACER is controlled like an R/C car with a pistol-grip transmitter. Takeoff and auto-hover with one-touch control using ultrasonic sensors that remove the frustration of learning complicated flying techniques. Intermediate and Beginner mode speed settings (Easy mode / Active mode) are available so you can experience the fun of drone flying at your own pace.
Readyset includes everything you need. Open the package then charge the battery to start flying.
Includes:
- Fuselage
- 2.4GHz Transmitter KT-231P+
- USB auto cut charger
- Pinion gear replacement tool (combination binding stick)
- 3.7V-1000mAh Li-Po battery
- Arm holder (10°, 20°)
- USB cable
- Spare propeller (for one drone)
- Quick start guide
- Instruction manual
Required for Operation:
- 4 x AA size batteries for transmitter
- Computer with USB port (for charging) or USB power charger (if output is more than 2A, full charge can be complete within one hour)
Features:
- Dogfight only 35cm above the ground. Speeds over the ground just like a Hoverboard. Newly developed drone technology.
- The DRONE RACER is equipped with advanced ultrasonic sensors, 6-axis gyroscope (3-axis angle speed sensors, 3-axis acceleration sensors), barometric pressure sensor and four fast response mini coreless motors. Speed switching function provides a choice between “Easy Mode” and “Active Mode” and delivers direct intuitive flight control.
- LOW HEIGHT FLYING CONTROL (Patented)
Altitude is automatically maintained with ultrasonic and barometric pressure
sensors. Altitude setting of 35cm or 60cm can be selected with a switch on the
R/C system and one-touch control is used for takeoff, hovering and landing. Some
people may feel frustrated in learning drone flying
techniques.Kyosho’s newly developed technology(patent pending) removes
these barriers so anyone can enjoy the fun of flying drones.
according to Kyosho research
Flies over any surface, even over water. Maintains constant altitude of 13inches (23 inches) using ultrasonic sensors.
- VARIABLE PROPELLER UNIT STRUCTURE (Patented)
H-type chassis with split upper and lower sections and left-right propellers connected on one propeller arm allow the propeller unit angle to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a racing weapon.
- KYOSHO DRONE CONTROL MIXING SYSTEM (Patented)
Optimal roll and yaw mixing match control from the steering wheel.
- DRONE BACKWARD CONTROL (Patented)
Uses similar control movement as a car.
- DRONE RACER SETTING MANAGER
DRONE RACER can connect to your (Windows) computer with the included USB cable to adjust flight settings. In addition, an optional cable can also be used to connect to an Android terminal with a USB host function to adjust settings. Download the free (DRONE RACER SETTING MANAGER) to adjust to your favorite setting and turn up the volume of fun.
Specs:
Length 302mm (with guard)
Width 300mm (with guard)
Height 65mm
Gear Ratio 5 : 1
Weight 130g approx.
Motor 8.5mm coreless
Battery 3.7V-1000mAh
Propeller D5 x P4
Flight Time 10 min approx.
Charging Time 1–2 hours (depending on USB power output)
30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller
angle setting)/38km/h approx. (when using optional parts)
Energy density
318Wh/L (not subjected PSE)
Flight altitude
Low 35cm/High 60cm approx. (setting can be changed using software
application)
PLEASE NOTE:
In operating these drones you become a pilot with responsibilities and must
comply with the rules found at: www.caa.govt.nz/rpas