Staying true to the Phanteks' Enthoo line, the Luxe features a sandblasted front and top panel. Ambient lighting run from top to front of the case on both sides. Even though smaller in size, the Enthoo Luxe boost many features from the award-winning Enthoo Primo. The Luxe comes pre-installed with a 200mm front fan and 2× PH-F140SP fans. Phanteks' Enthoo Luxe has an extensive watercooling capabilities that allows for four different radiator mounting locations as well as sizes.

Features:

Enthoo Luxe includes 1×200mm fan in front 1× 140mm fan up top and 1×140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans.

Appearance:

• Sandblasted aluminum faceplates with matte finish / Glossy white aluminum faceplates
• Multi-color ambient lighting
• Stealth interior design

Cooling:

• – Extreme cooling capacity
• – Support for up to 8× 120mm / 7× 140mm / 2× 200mm fans
• – Comes with 3 Phanteks premium fans
• – PWM fan hub plus 2× y-splitters allow for 8 fan connections* (11 fans max with additional y-splitters sold seperately)
• – Extensive water cooling support. Provides up to 4 different installation areas for slim * and thick radiators varying from single to triple (120mm and 140mm form factors). Clearance for push-pull fan configurations.
• – Innovative liquid cooling mounting systems: radiator brackets for easy installation

Functionality:

• Dual removable harddrive cages
• 2× removable Drop-N-Lock SSD brackets
• Fully equipped with dustfilters (1× top, 1× front, 2× bottom)
• Removable top mesh panel for easy fan installation and dust filter cleaning
• Compartment for fan installation in top panel
• Clean cable management using Phanteks' preinstalled Hoop-N-Loop cable ties
• Removable PSU cover
• Mod friendly structure uses screws NOT rivets
• 10 color abient lighting controller
• 2× USB 3.0, 2× USB 2.0, microphone, 3.5mm audio jack

Case Specifications:

• Dimension: 235 mm x 560 mm x 550 mm (W x H x D)
• Form Factor: Full Tower Chassis
• Material(s): Aluminum faceplates, Steel Chassis
• Motherboard Support: ATX, EATX, mATX, SSI EEB
• Front I/O: 2× USB 3.0, 2× USB 2.0, Mic, Headphone
• Side Window: Yes, split-window design
• PSU Cover: Yes
• Expansion & Drive Bays
  • Expansion slots: 8
  • External 5.25": 3
  • Internal 3.5": 6 (2× 3 HDD cages)
  • Internal 2.5": 7 (2× 3 HDD cages + 2× SSD brackets )
• Cooling
  • Front: 2× 120mm/2× 140mm/ 1× 200mm (Included)
  • Top: 3× 120mm/ 3× 140mm/ 1× 200mm
  • Rear: 1× 120mm/ 1× 140mm
  • Bottom: 2× 120mm/ 1× 140mm
  • HDD: 2× 120mm
• Liquid Cooling
  • Front: 120mm up to 240
  • Top: 120mm up to 360/ 140mm up to 420
  • Rear: 120mm 120/ 140mm 140
  • Bottom: 120mm up to 240/ 140mm 140
• Clearance
  • Graphic card: 347mm/ 338mm minus reservoir diameter (reservoir bracket installed)/ 472mm (without HDD Cages)
  • CPU cooler: 193mm
  • Cable management: 27mm (39mm at PSU area)

Packaging Information

• PH-ES614L
  • 325mm x 635mm x 632mm (WxHxD)
  • Net Weight 13.9kg
  • Gross Weight 16kg