High-Performance and Energy-Efficient
GIGABYTE M.2 SSD adopts Phison's E15T controller and 3D NAND flash,
delivers up to 3400 MB/s sequential reads and 2500 MB/s sequential write
performance. By utilizing Host Memory Buffer technology, the SSD controller can
access the host DRAM without performance loss.
FEATURES
- Form Factor: M.2 2280
- Interface: PCIe 3.0 x4, NVMe 1.4 interface
- Sequential Read Speed: up to 3,400 MB/s
- Sequential Write speed: up to 2,500 MB/s
- HMB (Host Memory Buffer) supported
- TRIM & S.M.A.R.T supported
- Energy-efficient
SPECIFICATIONS
- Interface: PCI-Express 3.0 x4, NVMe 1.4
- Form Factor: M.2 2280
- Total Capacity: 500GB
- External DDR Cache: N/A
- Sequential Read speed: Up to 3400 MB/s
- Sequential Write speed: Up to 2500 MB/s
- Random Read IOPS: Up to 300K
- Random Write IOPS: Up to 390K
- Dimension: 22 × 2.3 × 80 mm
- Mean time between failure (MTBF): 1.5 million hours
- Power Consumption (Active):
- Average R: 3150mW
- Average W: 3250mW
- Power Consumption (Idle):
- Idle: 30mW
- L1.2 < 5mW
- Temperature (Operating): 0°C to 70°C
- Temperature (Storage): –40°C to 85°C
- Warranty:
- Limited 5-years or 300TBW.
- Limited warranty based on 5 years or 300TBW, whichever comes first.
- TBW is evaluated by JEDEC workload standard.
- TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
- When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)
- Note:
- Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
- Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
- Speeds based on internal testing. Actual performance may vary.
- 1GB = 1 billion bytes. Actual useable capacity may vary.