No Power Cable Included
This is the specification of Model FSP400–60HCN; AC-line powered switching power supply with active PFC (Power Factor Correction) circuit, meet EN61000–3–2. Also, +5Vsb power is less than 0.5Winput at power off mode (PS_ON input at high state) which is comply with ErP Lot 6 year 2013 requirement.
Specifications
Model Name: FSP400–60HCN
Wattage: 400W
Dimension: 140mm (L) × 150 mm (W) × 86mm (H)
Product Highlight: Efficiency Level 78%, Erp Lot <0.5W, Input Voltage 230V
General Specification:
Effciency 78%
PWOK Delay Time 500ms > PWOK > 100ms
EMC performance
EN55022 class B
EN55024
EN 61000–3–2
EN 61000–3–3
Input Electrical Specification:
Input Frequency 47 ~ 63 Hz
Input Current 230V@ < 2.5 Amps – rms
Output Specification:
Hold-up time 230V/50Hz 17mSec. Minimu,@80% Load
Output Rise Time
- 3.3Vdc : 20ms Maximum
- 5Vdc : 20ms Maximum
- 12Vdc : 20ms Maximum
- 5Vsb : 20ms Maximum
- 12Vdc : 20ms Maximum
Environmental Requirement:
Temperature Range Operating : 10 to +40℃
Storage :-20 to +80℃
Humidity:
Operating 5–95% to % RH, Non-condensing
Storage 5–95% to % RH, Non-condensing
MTBF – The power supply reliability, when calculated by MIL-HDBK-217;latest
revision, are exceed 100,000 hours with all output at typical load and an
ambient temperature of 25℃.
Safety: CE,TUV