The Kingston FURY Beast DDR4 provides a powerful performance boost for gaming, video editing and rendering. It features Plug N Play automatic overclocking at 2666MHz and is both Intel XMP-ready and ready for AMD Ryzen. FURY Beast DDR4 stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.
FURY KF426C16BBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4–2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP)
2.0. Total kit capacity is 8GB. Each module has been tested to run at
DDR4–2666 at a low latency timing of 16–18–18 at 1.2V. Additional timing
parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below.
Each 288-pin DIMM uses gold contact fingers.
FEATURES
- Low-profile heat spreader design
- Cost-efficient, high-performance DDR4 upgrade
- Intel XMP-ready
- Ready for AMD Ryzen
- Plug N Play functionality at 2666MHz
SPECIFICATIONS
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.34” (34mm), w/heatsink
- CL(IDD): 16 cycles
- Row Cycle Time (tRCmin): 45.75ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin): 260ns(min.)
- Row Active Time (tRASmin): 29.25ns(min.)
- UL Rating: 94 V – 0
- Operating Temperature: 0C to +85C
- Storage Temperature: –55C to +100C
- Power Supply:
- VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- FACTORY TIMING PARAMETERS:
- Default (Plug N Play): DDR4–2666 CL16–18–18 @ 1.2V
- XMP Profile #1: DDR4–2666 CL16–18–18 @ 1.2V