HyperX Kingston HyperX Fury 16GB is a kit of two 1G x 64-bit (8GB) DDR4–3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4–3200 at a low latency timing of 16–18–18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4–2400 timing of 17–17–17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
- Default (JEDEC): DDR4–2400 CL17–17–17 @1.2V
- XMP Profile #1: DDR4–3200 CL16–18–18 @1.35V
- XMP Profile #2: DDR4–3000 CL15–17–17 @1.35V
Specifications
- CL16 288-pin
- Memory Type – DDR4
- Capacity – 16GB (2×8GB)
- Tested Speed – 3200MHz
- Tested Latency- 16–18–18
- Power Supply: VDD – 1.2V Typical
- VDDQ – 1.2V Typical
- VPP – 2.5V Typical
- VDDSPD – 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.624” (41.24mm), w/heatsink